-
Smart UE1
Inspection’s Swiss Army knife: multi-methods aerospace-dedicated tool boosting efficiency in all your daily operations
Multi-method single channel (UT, ET & resonance) and multi applications instrument for efficient, flexible and reliable inspections.
The SmartUE1 is referenced in more than 50 NTM procedures to maintain AIRBUS aircrafts.
-
SMART U32
One modular instrument for quick and accurate aerospace PAUT inspections – for every level of expertise
Smart U32 is an UT and PAUT modular, dedicated multi-apps, portable instrument for quick and accurate C-Scan acquisition and analysis. Gain access to an innovative and efficient way of performing ultrasonic inspection while staying connected and synchronized with your team.
-
CladTool
Fast and cost-effective go / no-go clad diagnosis for any technician available on-site
Clad Tool is a Go/no-Go tool for instant detection of clad layer after blending-out corrosion or scratches.
The CladTool is referenced in NTM procedure NTM 51-10-30
..
-
ThicknessTool
20 times faster and accurate thickness mapping of blended-out areas
Thickness Tool is a PAUT device + 32 elements Roller probe + acquisition, analysis and reporting software for super quick thickness measurement.
. -
D-LamTool
Ultra-fast and easy go/no-go composite panels delamination assessment by any member of your team
D-Lam Tool is a small, portable ultrasonic phased-array (32 sensors) go/no-go device for easy preliminary analysis of delamination on multilayered composite panels (CFRP/GFRP).
-
Moiréview
2-in-1 tool for dents evaluation from 50 μm either in direct read or high-precision mode enabling fast and accurate decision-making
MoiréView is a Moiré effect based device for direct-read optical measurement of dents from 50 μm to 4 mm and data post-treatment software for analysis and reporting.
-
LineView
Cost-effective easy-to-use device for quick and accurate gaps / flushes inspections above 1mm
Line View is an optical high-definition laser profilometer, for quick evaluation and measurement of gaps and flushes. It helps your team to perform quicker surface inspections. The tool is designed to be operated with minimal training, allowing operators to take full advantage of inspection time to obtain results and make decisions.
-
ScratchView
Cost-effective easy-to-use device for quick and accurate scratches measurements above 0.03 mm
Scratch View is an optical high-definition laser profilometer, for quick evaluation and measurement of very small defects. Teammate of Line View for wide coverage from 0.03 mm up to 7 mm damages.
Referenced on Airbus A320 NTM 53-00-01-220-802-A01
-
NDTkit UT
Safe decision making by automated analysis and reporting of plenty UT data sources
Automated software for processing high-volumes of data from various ultrasonic instruments.
-
NDTkit RT
Customizable automated processes for reliable and repeatable analysis at high cadences of RT work
NDT Kit RT is a software for radiography image analysis, with a set of configurable and automated processes for industrial applications. Now your team can have access to a better analysis, adapted processes for a real work optimization on both industrial and laboratory volume level.
-
Remote Assistance
Secured, On-site expert support for real time problem solving
TESTIA Remote Assistance is a browser-based application for real-time expert quality assurance. A confidential channel for fast collaborative resolution
of sensitive Aerospace inspection issues. -
Turnkey Inspection Solutions
A tailor-made NDT machine solution for your specific needs to boost your efficiency
• UT & UTPA Automatic Scanning Machines
• UTPA Semi-Automatic Scanning Machines
• IRT Machines
• PT, MT Lines
• Automated Fiber Placement & Cure Flow Front Moniroting
Complementary services: feasibility studies, procedures writing, qualification, training, inspections, etc. -
Smart Inspection Drone
10x faster and traceable GVIs enabling efficient and state-of-the-art maintenance management
Two steps integrated solution: drone for image acquisition and software for defect characterization, localization and sizing.
-
SmartScan
Flexible scanner for easy and accurate acquisition with cost efficiency
Multi-method precision scanning system for small and medium parts with the best value-price ratio on market. Unlocked access to this technology to OEMs, NDT providers and university labs for better capabilities at any workload
-
Smart Mixed Reality
Push your efficiency by enhanced reality
Smart Mixed Reality opens a new stage of technical developments into the manufacturing, inspection and maintenance performance. This application obtains an interactive and digital exchange of work instructions between engineering departments and shop floors. As well, the non-conformities management can be simplified through paperless work and especially by linkage of data from different sources (ERP, Excel, XML, CAD), which allow rapid feedback loops with Engineering.
Smart Mixed Reality is known Airbus-internally under the name MiRA and has been integrated in many shop floors of different aircraft models worldwide since 2012. Testia’s experience in the integration of smart productivity allows us to satisfy customized needs and requirements.