Careers - Testia

join our growing team worldwide

Asia-Pacific

NDT LEVEL 3 OPERATOR

TESTIA, an Airbus company for over 25 years, specializes in Aerostructure Inspection & Non-Destructive Testing (NDT). We serve our clients through all inclusive study contracts, technical assistance mission, specialized training courses and state of the art products & software, for OEMs and their suppliers as well as airlines and MROs.
In the frame of its development in the Asia pacific Region, TESTIA is looking for a NDT Level 3 operator. The position is based in Kuala Lumpur (Malaysia).

Mission:

Under the supervision of the TESTIA’s Regional Manager and in collaboration with the TESTIA team in the region, your mission includes:

Level 3 services:
– To perform tasks of Level 3 service in-situ both for maintenance and manufacturing.
– NDT Procedure writing and validation according to the aerospace standards.
– To advise customers for the development of new inspection methods.
– To participate to the setting up of new inspection devices and machines.
– To prepare and follow up the NADCAP certification of customers.
– To evaluate / qualify new NDT equipments or machines.
– To prepare or realize internal or external audits NDT audits for manufacturing or maintenance environment.
– To perform the skill review of the certified staff L1 or L2.
– To write and/or review written practices of the customers.
– To perform NDT trainings and examinations.
– To perform inspections on customer site.

NDT Training / examination:
– To supply NDT trainings according to EN 4179 / NAS 410
– To supply NDT examination according to EN 4179 / NAS 410 though full employer certification scheme or National Board (COSAC, BINDT).
– To define courses and examination in the frame of the ermployer certification scheme.

NDT inspections:
– To perform L2 NDT inspections for manufacturing.
– To perform L2 NDT inspection for maintenance under Part 145 agreement.

Operational / commercial Responsibility:
– In support to your hierarchy, you are responsible for the technical development of the Malaysian office of TESTIA Asia Pacific: equipment, machines, training facilities…
– You are the responsible for the development of your technical perimeter through all the activities listed above in Malaysia and, supporting the team, in the Asia Pacific Region.

Profile:

Experienced background with 5 to 10 years experience in Aerospace for MRO and manufacturing. Being Level 3 EN4179 / NAS 410 in at least one method and L2 in 3 methods is mandatory for the job.

You shall be energetic, innovative, curious, enthusiastic, constructive, autonomous, rigorous and polyvalent.
You shall be able to lead several projects at a time, while dealing with priorities.
You shall wish to progress within an innovative and growing medium-size company.
A good level of English is essential.

About the position:

Contract: Local contract, permanent
Location: Kuala Lumpur (Malaysia) with frequent travels in the Asia Pacific Region.
Salary: depending on profile
Thank you for sending your CV and cover letter to moc/aitset]ta[reinruof/salocin

UT/ET MAINTENANCE NDT TECHNICIAN – SINGAPORE

TESTIA, an Airbus company, is specialized in aerospace Non-Destructive Testing (NDT) since 1991. We train, certify, audit and advise NDT technicians of the aerospace industry and beyond. We also test manufacturing or in-service parts as well as aircraft fluids. With a strong engineering background, we develop standard and customized NDT tools for our customers

Context of the mission:

TESTIA is developing its expertise operations in Asia pacific, particularly in the domain of aerospace maintenance inspections.

Mission & Objectives:

Your main missions will consist in:

Carrying out non destructive tests on aircrafts or components from aircrafts in maintenance or at manufacturing stage.
Implementing the technique, carrying out the adjustments and calibration of the device and applying inspection procedures, according to one’s certifications.
Writing down technical instructions for the implementation of the requested test to be validated by the Level 3.
Writing down inspections reports including results, sanctions and certifying the component’s conformity as per specified acceptation criteria.
If need be, writing down delivery documents (delivery slip, conformity declaration and EASA form 1) for the inspected whole.
Participating in the development of feasibility studies by leading non destructive tests on new materials, procedures, assemblies, structures… etc.
Contributing to the development of NDT solutions dedicated to specific needs, followed by their adjustment, qualification and promotion.
Maintaining obtained skills and certifications and acquiring new ones.

Required skills:

3 years experience in maintenance NDT inspections.
Degree in physics or equivalent.
Good knowledge of aircraft structures and materials.
EN4179/NAS410 Ultrasonic and Eddy Current level 2 certification at least.
Kowledge in UTPA will be a plus.
An additional PART 145/FAR 145 training and experience will be a plus.
Good level of English.
You shall be energetic, flexible, organized, rigorous and autonomous, as well as being a people-person with good writing skills

PLEASE DO NOT APPLY TO THIS POSITION IF YOU DO NOT HAVE THE REQUIRED ABOVE SKILLS / CERTIFICATIONS

About the position:

Contract: Local contract, permanent
Location: Singapore.
Frequent travel may be required.
Salary: depending on profile

Thank you for sending your CV and cover letter to moc/aitset]ta[tnemeturcer

Canada

DIGITAL RADIOGRAPHY NDT TECHNICIAN – QUEBEC (F/M)

Testia, an Airbus company, has been specialising in Aerospace Non Destructive Testing for over 25 years. We serve our clients through all-inclusive study contracts, technical assistance missions or specialized training courses for principals and their suppliers as well as airlines and MROs.

Context of the mission:

TESTIA is developing its expertise operations in Canada with 3 main focuses: NDT inspections, training and engineering

Missions & Objectives:

Your main missions will consist in:
– Carrying out non destructive tests on aircrafts or components from aircrafts in maintenance or at manufacturing stage
– Implementing the technique, carrying out the adjustments and calibration of the device and applying inspection procedures, according to one’s certifications
– Writing down technical instructions for the implementation of the requested test to be validated by the Level 3
– Writing down inspections reports including results, sanctions and certifying the component’s conformity as per specified acceptation criteria
– If need be, writing down delivery documents (delivery slip, conformity declaration and EASA form 1) for the inspected whole
– Participating in the development of feasibility studies by leading non destructives tests on new materials, procedures, assemblies, structures… etc.
– Contributing to the development of NDT solutions dedicated to specific needs, followed by their adjustment, qualification and promotion
– Maintaining obtained skills and certifications and acquiring new ones

Required skills:

Degree in physics or equivalent
Good knowledge of aircraft structures and materials
EN4179/NAS410 Digital Radiography level 2 certification at least
An additional PART 145/FAR 145 training and experience will be a plus
Good level of English &/or French
You shall be energetic, flexible, organized, rigorous and autonomous, as well as being a people-person with good writing skills

Information:

Contract: Local contract, permanent
Location: Mirabel, Québec, Canada
The job shall be performed both at Testia’s facility and at the clients’. Travels to Canada and North America.
Salary: depending on profile

Thank you for sending your CV and cover letter to moc/aitset]ta[ennavahc/cire-cram

TECHNICIEN(NE) CND RADIOGRAPHIE NUMÉRIQUE – QUÉBEC (F/H)

TESTIA, filiale du groupe Airbus, est spécialisée dans le Contrôle Non Destructif pour l’industrie aéronautique et spatiale depuis plus de 25 ans. Nous intervenons auprès de nos clients à travers des contrats d’étude au forfait, des missions d’assistance technique ou des formations spécialisées pour les donneurs d’ordres et leurs fournisseurs ainsi que pour les compagnies aériennes et MRO.

Contexte de la mission:

TESTIA souhaite développer ses activités d’expertises au Canada sur 3 axes prioritaires : Inspection NDT, training, ingénierie.

Missions et objectifs du poste :

Vos missions principales consistent à :
– Procéder à des contrôles non destructifs sur des aéronefs ou éléments d’aéronefs en maintenance ou en fabrication
– Mettre en œuvre la technique utilisée, procéder aux réglages et calibrage de l’appareil et appliquer des procédures d’inspection, selon ses certifications
– Rédiger les instructions techniques pour la mise en œuvre du contrôle requis pour validation par le Niveau 3
– Rédiger les rapports d’inspections contenant les résultats, la sanction et attester de la conformité de l’élément selon les critères d’acceptation spécifiés.
– Rédiger le cas échéant les documents libératoires (bordereau de livraison, déclaration de conformité et EASA Form1) pour les ensembles ou sous-ensemble inspectés.
– Participer à la réalisation d’étude de faisabilités en menant des investigations non destructives sur des nouveaux matériaux, procédés, assemblages, structures, etc.
– Contribuer au développement de solutions CND dédiées à des besoins spécifiques, puis à leur mise au point, à leur qualification et à leur promotion
– Réaliser la revue des exigences client conformément aux procédures qualité internes pour réaliser la prestation
– Maintenir les compétences et certifications obtenues et en acquérir de nouvelles.

Compétences recherchées :

De formation bac + 2 de type mesures physiques ou équivalent
Connaissances matériaux et structures Avion
Certification(s) EN4179/NAS410 Niveau II en Radiographie Numérique,
Une formation et expérience complémentaires PART 145/ FAR 145 seraient un plus
Niveau d’Anglais correct
Dynamique, flexible, organisé(e), rigoureux (se), autonome et force de proposition, vous ferez également preuve d’un excellent relationnel, et d’un bon rédactionnel

Informations sur l’offre :

Contrat : Contrat local à durée indéterminée
Lieu : Mirabel, Québec, Canada
Le travail se fait sur base et chez les clients. Déplacements sur le Canada et sur Nord USA.
Rémunération : en fonction du profil

Merci de bien vouloir faire parvenir CV et lettre de motivation par mail à moc/aitset]ta[ennavahc/cire-cram et moc/aitset]ta[qnezam/eilime

NDT LEVEL 2 TECHNICIAN – QUEBEC (F/M)

TESTIA, an Airbus company, is specialized in aerospace Non-Destructive Testing (NDT) since 1991. We train, certify, audit and advise NDT technicians of the aerospace industry and beyond. We also test manufacturing or in-service parts as well as aircraft fluids. With a strong engineering background, we develop standard and customized NDT tools for our customers.

Context of the mission:

For a mission for one of its customer, TESTIA is looking for a NDT technician Level 2 EN4179/NAS410 in UT, PT and ideally ET.

Missions & Objectives:

Your main missions will consist in:

– Carrying out non destructive tests on aircrafts or components from aircrafts in Final Assembly Line or at manufacturing stage
– Implementing the technique, carrying out the adjustments and calibration of the device and applying inspection procedures, according to one’s certifications
– Writing down technical instructions for the implementation of the requested test to be validated by the Level 3
– Writing down inspections reports including results, sanctions and certifying the component’s conformity as per specified acceptation criteria
– If need be, writing down delivery documents.
– Participating in the development of feasibility studies by leading non destructives tests on new materials, procedures, assemblies, structures… etc. and determining the most suitable methods
– Contributing to the development of NDT solutions dedicated to specific needs, followed by their adjustment, qualification and promotion
– Conducting the follow up of customers’ requirements as per stated in internal quality procedures to carry out the operation
– Maintaining obtained skills and certifications and acquiring new ones.

Required skills:

Degree in physics or equivalent
Good knowledge of aircraft structures and materials
EN4179/NAS410 Ultrasonic, Dye Penetrant level 2 certifications at least. Eddy Current level 2 is a plus.
Good level of English
You shall be energetic, flexible, organized, rigorous and autonomous, as well as being a people-person with good writing skills

Information:

Contract: Local contract, permanent
Location: Montréal area.
The job shall be performed both at Testia’s facility and at the client’s facilities.
Salary: depending on profile

Thank you for sending your CV and cover letter to moc/aitset]ta[tnemeturcer

France

Pas d’offres actuellement
No pending vacancies

Germany

Derzeit bietet die Testia GmbH keine offenen Stellen.

Spain

INSPECTOR ENSAYOS NO DESTRUCTIVOS

OFERTA DE EMPLEO ENSIA : INSPECTOR ENSAYOS NO DESTRUCTIVOS (EN4179)

Descripción del puesto:

ENSIA EXPERT SL. , empresa perteneciente al GRUPO AIRBUS, precisa incorporar inspectores de Ensayos No Destructivos para el sector aeronáutico.

Sus principales tareas serán:
– Realizar inspecciones de ensayos no destructivos tanto en fabricación como en servicio
– Realizar informes de inspección
– Soporte para la redacción de procedimientos de inspección para aeronaves

Requisitos:

– Experiencia como inspector de al menos de 2 años en el sector aeronáutico (EN4179)
– Cualificación al menos en el/los método/s de ultrasonidos y/o corrientes inducidas
– Se valorará experiencia en otros métodos de inspección
– Se valorarán conocimientos sobre materiales y estructuras aeronáuticas
– Nivel medio/alto de Inglés
– Disponibilidad para viajar
– Disponibilidad para cambiar de domicilio en la península

Información de la oferta:

Área: Madrid, Barcelona y Castilla la Mancha
Jornada: Completa
Salario: A convenir

POSTULAR

Para aplicar a esta oferta en necesario enviar el CV por correo electrónico a::
moc/trepxeaisne]ta[onarres/ordep o moc/subria]ta[lanretxe/zelaznog-zehcnas/rotciv

TÉCNICO ADMINISTRATIVO

OFERTA DE EMPLEO ENSIA : TÉCNICO ADMINISTRATIVO

Descripción del puesto:

ENSIA EXPERT SL. , empresa filial del GRUPO AIRBUS, precisa incorporar un Técnico Administrativo para oficina de Madrid.

Sus principales tareas serán:
– Dar soporte al responsable de RRHH y financiero
– Grabación de datos

Gestión de Documentación

Requisitos:

Técnico Administrativo con experiencia en el ámbito financiero y/o RRHH.
Altos conocimientos y manejo del paquete Office (Excel, Word y Power point)
Agilidad en la tramitación de volumen de trabajo
Nivel de inglés medio/alto.
Persona dinámica, flexible, organizada, rigurosa, autónoma con sentido de la responsabilidad que demuestre excelentes aptitudes interpersonales y con espíritu de equipo.
Imprescindible carnet de conducir

POSTULAR

Si estás interesado en esta posición por favor enviar el CV a:
moc/subria]ta[lanretxe/zehcnas-esoj-nas/akire o moc/subria]ta[lanretxe/zelaznog-zehcnas/rotciv

U.A.E.

TECHNICAL SALES MANAGER MIDDLE EAST & AFRICA

Temporary prior to permanent contract

Identification:

Job title: Tech Sales Manager for Middle East & Africa
Reporting to: Chief Commercial Officer (CCO) & Regional Managing Director (MD)

Some customers: Airbus (internal customer), Bombardier, Emirates, Etihad Airways Eng., Gulf Air, Air Arabia, Egyptair, SAAT, Safran, Dassault Aviation, F1 teams, top fashion brands, top luxury car brands, , Ariane Group…
Our Values: Excellence. Innovation. Integrity. Flexibility. Trust.
Our Mission: Be the world’s most flexible and caring testing partner of all critical industries.

Summary:

Within the framework of the commercial transformation and internationalization of Testia, we are looking for an organized, proactive, communicative and resourceful technical sales person to run sales activities and business development to boost our growth in the regional market.

Potential Activities:

Run sales and business development activities in the region;
Apply commercial strategy of the region;
Tackle on commercial actions from identification to closing and follow-up of prospects (reminding interested customers, pre-selecting, prospecting, qualifying, negotiating, contracting, closing, monitoring);
Overall commercial actions monitoring;
Support/organization of logistics for some commercial events (Airshows…);
Information sharing and sales boosting.

Expected outputs from TESTIA to the employee:

Direct and regular coaching from Regional Managing Director and CCO;
Mission fine-tuning to match the person’s learning objectives;
Multidisciplinary tasks and teamwork with most departments of the company;
Aerospace and non-destructive testing industry experience and understanding;
Rewarding and re-usable industry experience, tools and methods.

Expected outputs from the employee:

Successful sales track-record matching and over-achieving targets
Fresh-eye ideas on methods, opportunities and business development;
More business culture within the company;
Deeper presence in MEA;
Stronger positive knowledge about the company in the region.

Candidate profile:

Double Master diploma or strong experience between business & engineering;
Sales, Marketing and Business Development academic knowledge or industry experience;
First experience in relevant industry field through engineering, NDT or business aspects;
Organization and synthesis;
Proactivity;
Enthusiasm and determination;
Communication, interpersonal, teamwork;
Autonomy and resourceful;
Negotiation level in English. French is a plus;
People-person and empathy;
Enjoy to multi-task and work on multidisciplinary tasks;
Enjoy to work in changing environment;
Enjoy working with different cultures;
Able to get the big picture of an organization.

Administrative information:

Start: October 2019
Place: Dubaï, UAE
Salary: According to experience
Remuneration: According to level of experience.

Send your CV to moc/aitset]ta[sadanac/yddet and moc/aitset]ta[reinruof/salocin

HEAD OF TESTIA MIDDLE-EAST

Identification:

Job title: Head of Testia Middle East
Reporting to: Testia International Development and Partnership Director

TESTIA, an Airbus company, is specialized in aerospace Non-Destructive Testing (NDT) since 1991. We train, certify, audit and advise NDT technicians of the aerospace industry and beyond. We also test manufacturing or in-service parts as well as aircraft fluids. With a strong engineering background, we develop standard and customized NDT tools for our customers.
Some customers: Airbus (internal customer), Bombardier, Emirates, Etihad Airways Eng., Gulf Air, Air Arabia, Egyptair, SAAT, Safran, Dassault Aviation, F1 teams, top fashion brands, top luxury car brands, , Ariane Group…

Our Values: Excellence. Innovation. Integrity. Flexibility. Trust.
Our Mission: Be the world’s most flexible and caring testing partner of all critical industries.

Summary:

Within the framework of the commercial transformation and internationalization of Testia, we are looking for an organized, proactive, communicative and resourceful Head of Activity to operate the future activity of Testia in the Middle East region.

Management Responsibility:

You have the responsibility of the global management and activity of the business.
You commit to your hierarchy for ensuring financial management, delivered quality level, deadline management, costs and margin management, customer satisfaction.
You manage the business as a profit centre (turnover, margins, P&L, resources, organization…)
You supervise operational NDT teams: to this end:
1. You deal with your colleagues’ administrative follow-up (validation of timesheets, expense accounts…)
2. You set each of your colleagues with their annual goals, you look after the follow-up of those goals as well as determine their end-of-year bonus
3. You define your colleagues’ training and certification retention needs targeting at their skills improvement and career plans
4. You report recruitment needs and take part to the recruitment process to develop the business
You look after the life of the entity: frequent coordination meetings, experience, resources, and business sharing…
You guarantee the rightful application of the law, of internal quality/security procedures rules (HR, Quality, Procurement…) in your teams.
You suggest improvements/evolutions for internal organization.

Operational Responsibility:

You are your team’s technical referent: to proofread, validate and sign the projects.
You develop the Testia NDT aerospace training center and examination in the ME region.
You manage work schedules while optimizing resources and ensuring internal / external customer satisfaction.

Commercial Responsibility:

You support the commercial staff for the new customers prospection and retention so as to:
1. Develop the Asia pacific client portfolio, by offering TESTIA’s services (inspections, training, engineering, products, L3 services, solutions, periodic checking…)
2. Develop the worldwide client portfolio, by cooperating with other TESTIA branches, for the NDT PART145 activity
You actively seek new market opportunities in close cooperation with Airbus local teams – Customers Services, International Development

Candidate profile/Required Skills:

Experienced background with 5 to 10 years experience in Aerospace. MRO knowledge is compulsory.
As a true Manager, you shall supervise and inspire your teams with enthusiasm, by sharing the company values and applying the company’s strategy, in order to develop your colleagues and customer satisfaction.
You shall be energetic, innovative, curious, enthusiastic, constructive, autonomous, rigorous and polyvalent.
You shall be capable of leading several projects at a time, while dealing with priorities.You shall wish to progress within an innovative and growing medium-size company.
A good level of English is essential.
The position is based in Dubaï, UAE. Frequent business trips over the ME region expected.

Administrative information:

Start: October 2019
Place: Dubaï, UAE
Salary: According to experience
Remuneration: According to level of experience.

Send your CV to moc/aitset]ta[sadanac/yddet and moc/aitset]ta[reinruof/salocin

NDT INSPECTOR / ENGINEER

This is an exciting opportunity to join a rapidly growing Airbus company supporting the needs of others.
TESTIA, a subsidiary of the Airbus Group, has been specializing in Non Destructive Testing for the aerospace industry for more than 25 years.

We work with our customers through fixed-price contracts, technical assistance missions or specialized training for contractors and their suppliers as well as for airlines and MROs.

Job Function:

As part of the expansion of its expertise activities in the field of aeronautical maintenance in United Kingdom and abroad, TESTIA is looking for NDT Technicians / Inspectors / Engineers.

Academic Qualification:

Good Level Science degree (BSc)

Academic Qualification:

In direct collaboration with a team of NDT specialists, your main missions are:
– Conduct Non-Destructive Testing on aircraft or aircraft components in maintenance or manufacturing
– Write the technical instructions for the implementation of the inspections
– Write the inspection reports containing the results, the sanction and certify the conformity of the materials, components or structures according to the specified acceptance criteria.
– Carry out the review of the customer requirements in accordance with the internal quality procedures to perform the service

Skills sought:

– Knowledge of materials and Aircraft structures
– Verifiable evidence of approved Training course attendance
– EN4179 Level I / II certifications or military equivalent in Eddy Current, Ultrasonic Radiography (Film and or Filmless)
– Verifiable ‘On the Job’ training hours is mandatory
– Complementary training PART 145 / FAR 145 would be a plus
– Competent with MS Office functions including Drawing packages (MS Visio Pro)

You will need to be an effective communicator both verbally and written to support our UK and growing global customer network.
Applicants must be prepared to travel to customer facilities as and when required, be dynamic, flexible, organized, rigorous, autonomous in your field of expertise and, you have a sense of responsibility and will also demonstrate excellent interpersonal skills and team spirit.

Offer Information:

Contract: Full time Permanent position (following probationary period)
Location: Bristol United Kingdom
Remuneration: Good rates of pay depending on the profile
Hours of work 37.5 Hours Mon-Friday

APPLY

Please send CV and cover letter by email to:moc/subria]ta[ku-aitset/nimdA

TECHNICAL SALES MANAGER

Identification:

Job title: Tech Sales Manager for UK area
Reporting to: Chief Commercial Officer (CCO) & local Managing Director (MD)

Some customers: Airbus (internal customer), Bombardier, Liebherr, Lufthansa, AirFrance, Safran, Dassault aviation, F1 teams, top fashion brands, top luxury car brands, CEA, CNES, Ariane Group…
Our Values: Excellence. Innovation. Integrity. Flexibility. Trust.
Our Mission: Be the world’s most flexible and caring testing partner of all critical industries.

Summary:

Potential Activities:

Run sales and business development activities in the region;
Apply commercial strategy of the region;
Tackle on commercial actions from identification to closing and follow-up of prospects (reminding interested customers, pre-selecting, prospecting, qualifying, negotiating, contracting, closing, monitoring);
Overall commercial actions monitoring;
Support/organization of logistics for some commercial events (Airshows…);
Information sharing and sales boosting.

Expected outputs from TESTIA to the employee:

Direct and regular coaching from Managing Director and CCO;
Mission fine-tuning to match the person’s learning objectives;
Multidisciplinary tasks and teamwork with most departments of the company;
Aerospace and non-destructive testing industry experience and understanding;
Rewarding and re-usable industry experience, tools and methods.

Expected Outputs from the employee:

Successful sales track-record matching and over-achieving targets
Fresh-eye ideas on methods, opportunities and business development;
More business culture within the company;
Deeper presence in Latin America;
Stronger positive knowledge about the company in the region.

Remuneration:

According to level of experience.

Candidate Profile / Required Skills:

Double Master diploma or strong experience between business & engineering;
Sales, Marketing and Business Development academic knowledge or industry experience;
First experience in relevant industry field through engineering, NDT or business aspects;
Organization and synthesis;
Proactivity;
Enthusiasm and determination;
Communication, interpersonal, teamwork;
Autonomy and resourceful;
Negotiation level in English and Spanish. French is a plus;
People-person and empathy;
Enjoy to multi-task and work on multidisciplinary tasks;
Enjoy to work in changing environment;
Enjoy working with different cultures;
Able to get the big picture of an organization.

Administrative information:

Start: asap
Place: Bristol, UK
Salary: According to experience
Send your CV to:moc/aitset]ta[sadanac/yddet and moc/subria]ta[spillihp/p/htiek ;

UT Level 2 Qualified NDT inspectors

Urgently required UK Based 24 Month contract

UT Level 2 qualified NDT inspectors either EN4179 /NAS 410 or ISO9712 considered but must have Aerospace experience.
All applicants must have verifiable training and experience records to enable their application to progress.
The requirement is a fixed contract for a 24 month period where personnel must be willing to stay for the term of contract to give continuity.

Following a specialised 3 month training program at the facility personnel will be examined by the customer Responsible Level 3 utilising the company’s specialised UT equipment and processes.

Shift pattern
Weeks 1 to 4 – day shift 08:00 – 16:30
Weeks 5-12 – Continental shift pattern 2 days, 2 nights 4 days off (all 12 hour shifts 07:00 – 19:00 etc.)
Months 4 – 24 inclusive will be continuous continental shift as week’s 5-12.

Contract will attract a shift premium and an end of contract bonus will also be paid.
Attractive salary package is available to suitable candidates.

Further information is available should you have any questions.

Please contact

Charlotte Meale or Sarah Walbyoff
+44 (0) 1179 361242 or +44 1179 361674

Quality/Compliance Manager

Testia Ltd – Filton Bristol

Market position

Aerospace company based in Bristol
Autonomy within your role
Part 21 manufacturing environment
Part 145 Aircraft Inspection environment
NDT Training / Examination / Consultancy

Testia is a Global Aerospace business with the UK unit based in Bristol, they are looking for an experienced Quality / Compliance Manager to join the team.

Job Description

The Quality / Compliance Manager is responsible for:

Defining the company Quality Management System within the operational levels to ensure all areas of the business are working to QMS requirements
Ensuring the Quality Management System is managed, maintained and developed to the highest service and cost effective level
Liaise with external certification bodies to ensure QMS remains certified to relevant standards (BINDT ATO / OA / NANDTB / EN9100:2016 (AS9100D) / EN 9001:2015 / NADCAP / Part 145 MOE)
Develop and implement an internal audit plan, identifying and addressing non-compliances and improvement opportunities
Host / attend customer meetings and customer audits (onsite and offsite)
Work closely with customer auditors to assess the QMS system and demonstrate compliance
Ensuring non-conformances, production permits and concessions are progressed and closed out within customer expected timescales to expected levels of detail and consistency
Develop and build in quality to all processes to minimise inspection times / queries
Work closely with customers on any specific Quality initiatives
Develop and communicate clear action plans to address Quality problems and process issues (i.e. Sub contractor queries, inspection queries, manufacturing quality process queries)
Development and deployment of relevant Quality instructions, visual management systems, First Off and Final inspection procedures , standard operations for Quality processes and work instructions for specific tasks within the QMS system
To produce and to be accountable of all Key performance indicators (KPI) and report
them to the management team.
Maintain a list of Approved Suppliers
Assist in the collation and analysis of business metrics across the major process areas
Review and approval of staff personal competence and certification
Certification release of customer deliveries

Transnational Leader for cross nation Auditing processes

You will report directly to the Chief Operations Officer (COO)
Your mission will be:
– To be in charge and to develop and operate a Quality Auditing system aligned with our Testia Group Quality management team
– To audit all areas of Testia to ensure adherence to operational excellence at all Testia sites
– With operations and other functional areas, participate to write, review, revise and implement internal procedures within the organization.
– Corrective/Preventive Actions and Customer Complaints – With the COO and the HO quality system be the CA/PA administration and will raise and/or oversee any necessary CA/PAs, distribute, review responses and verify effective implementation.
– Interface with customers and respond to customer complaints and corrective actions

The Successful Applicant

The successful Quality / Compliance Manager will have:

Finalized Operational Excellence studies in production, engineering or similar technical
fields
• Ideally educated in quality management systems
• Min 5 years’ experience in auditing of production / In service environments
• Experience in Auditing to a lead Auditor standard or similar
• Experience in Aerospace recognized quality system (EN9100, ISO17025, NADCAP, etc.)
• Preferable knowledge as an auditor of Aero structure supplier
• Fluent in English written and spoken
• Preferable French, German and/or Spanish language skills
• Willingness to travel
• Flexible, able to work in a team and having the necessary authority
In this function you are directly reporting to the Managing Director of the Testia Ltd and the
COO of the Testia Holding.
Full apprenticeship, ONC/HNC/HND or relevant university degree in a mechanical engineering discipline
Experience within the Aerospace sector
Worked at a Senior Quality Engineer or management level within quality
Good working knowledge of AS standards
NADCAP experience would be beneficial
EASA Form 4 Compliance manager compliant
Knowledge of NDT

What’s on Offer

£42,500 – £47,500 depending on experience
25 Days leave + Public holidays
Up to 10% bonus
Company pension scheme
Flexible benefits
- Salary sacrifice car scheme available
- Private medical Insurance
Life Insurance

Send your CV to moc/subria]ta[spillihp/p/htiek

InFactory Solutions

DEVELOPMENT ENGINEER HIGH FREQUENCY EQUIPMENT/SIGNAL PROCESSING (F/M)

InFactory is a newly founded start-up of Airbus. As a 100% subsidiary we are familiar with the latest production methods and bring new technologies and innovations of the Aerospace industry into other markets and vice versa. Currently our focus is on technologies related to IoT and the implementation into the A350 aerospace production. This includes “in-process-monitoring” sensor systems, data analytics and augmented reality.
To support our team in Munich, we are looking for a Development Engineer (f/m) in the field of high frequency engineering and signal processing as of now. In our team, you will support the development of a new sensor product which uses high frequency technology to monitor manufacturing processes for composite parts.

Your tasks:

– Design and assembly of circuit boards for HF sensor applications
– Programming of hardware interfaces in ML and/or C
– Implementation of signal processing algorithms in Python
– Evaluation and optimization of sensor components
– Experimental testing of sensors in lab and industrial environment

Your opportunities:

– High responsibility for projects, self-reliant work, challenging problems, and vast possibilities to bring in own ideas
– Insights into the “Airbus world” and customers from various industries
– Work in a young, creative environment as part of a quickly growing, open-minded team with low scale hierarchies
– 100% start-up feeling (free coffee & beer, team pizza & events, home office, technical gadgets such as AR glasses, 3D printers, industrial robotics)

Your profile:

– MS in electrical engineering or a comparable field of study
– > 3 years working experience in high frequency engineering
– Programming knowledge in ML, C, and Python
– Willingness to work both in the lab and in the office
– Enthusiastic, creative, and passionate about technical innovations

Information:

Date: As soon as possible
Location: Munich, Germany

Have we sparked your interest? If so, we would be happy to receive your application via mail including your CV and your certificates at ten/snoitulos-yrotcafni]ta[ofni

C++ SOFTWARE DEVELOPER (F/M)

InFactory is a newly founded start-up of Airbus. As a 100% subsidiary we are familiar with the latest production methods and bring new technologies and innovations of the Aerospace industry into other markets and vice versa. Currently our focus is on technologies related to IoT and the implementation into the A350 aerospace production. This includes “in-process-monitoring” sensor systems, data analytics and augmented reality.
To support our team in Munich, we are looking for one or more C++ software developer(s) (f/m) with experience in C++ for image processing. In our team, you will participate in the development of a new product used to monitor manufacturing processes for composite parts.

Your tasks:

– You will participate in the development of software used to monitor a composite manufacturing process in real time.

Your opportunities:

Your profile:

– Ba.Sc or M.Sc in Computer Science
– 3+ year work experience C++ coding
– Knowledge in image processing (OpenCV) is a plus
– Willingness to travel is a plus
– Enthusiastic, creative, and passionate about technical innovations

Information:

Date: As soon as possible
Location: Munich, Germany

Have we sparked your interest? If so, we would be happy to receive your application via mail including your CV and your certificates at ten/snoitulos-yrotcafni]ta[ofni

SYSTEM ARCHITECT/PROJECT LEADER (F/M)

InFactory is a newly founded start-up of Airbus. As a 100% subsidiary we are familiar with the latest production methods and bring new technologies and innovations of the Aerospace industry into other markets and vice versa. Currently our focus is on technologies related to IoT and the implementation into the A350 aerospace production. This includes “in-process-monitoring” sensor systems, data analytics and augmented reality.
To support our team in Munich, we are looking for a System Architect (f/m) with strong leadership and project management capabilities. In our team, you will lead the development of a new product used to monitor manufacturing processes for composite parts.

Your tasks:

– You will manage and participate into a major product development project regarding AFP Manufacturing Process
– Your technical responsibilities will vary from system architecture and hardware architecture to system integration.

Your opportunities:

Your profile:

– M.Sc in Mecatronics or Electronics Engineering
– 3+ year work experience in a field directly related to this job opening
– Skills in product development and/or system architecture
– Skills in system integration, assembly and testing
– Robotics (Accuracies, Transformation, Kinematic, Operate KUKA robots, etc.)
– Willingness to travel
– Enthusiastic, creative, and passionate about technical innovations

Information:

Date: As soon as possible
Location: Munich, Germany

Have we sparked your interest? If so, we would be happy to receive your application via mail including your CV and your certificates at ten/snoitulos-yrotcafni]ta[ofni

IOT/DATA ENGINEER (F/M)

We are a newly founded start-up of Airbus Group. As a 100% subsidiary we are familiar with the latest production methods and bring new technologies and innovations of the Aerospace industry into other markets and vice versa. Currently our focus is on technologies related to IoT and the implementation into the A350 aerospace production. This includes “in-process-monitoring” sensor systems, data analytics and augmented reality.

To support our team in Munich, we are looking for an IoT/data engineer (f/m) with experience in C++. In our team, you will participate in the development of a new product used to monitor manufacturing processes.

Your tasks:

– You will participate in the development of software modules used to monitor different manufacturing processes with historical and real time data.

Your opportunities:

Your profile:

– Sc./M.Sc in Computer Science, Electrical Engineering or equivalent
– Background in software development, robotics or signal processing
– Knowledge in either connectivity, IoT or robotics
– Good C/C++ coding skills
– Enthusiastic, creative, and passionate about technical innovations

Information:

Date: As soon as possible
Location: Munich, Germany

Have we sparked your interest? If so, we would be happy to receive your application via mail including your CV and your certificates at ten/snoitulos-yrotcafni]ta[ofni

PROJEKTLEITER/-IN DATA ANALYTICS PROZESS

Wir sind ein frisch gegründetes Start-up der Airbus Group. Als 100-prozentige Tochterfirma der Airbus-Gruppe sind wir mit modernsten Produktionsmethoden vertraut und machen Technologien und Innovationen aus der Luftfahrt für andere Industrien nutzbar und umgekehrt. Aktuell liegt unser Fokus auf Technologien rund um IoT und deren Einsatz in der Flugzeugproduktion. Dazu gehören unter anderem moderne InProcess-Monitoring-Sensoren und die Digitalisierung von Fertigungsprozessen.

Zur Verstärkung unseres Teams in München suchen wir ab sofort eine(n) Projektleiter/-in, der uns im Bereich IoT/Data Science/Data Analytics unterstützt.

Deine Aufgaben:

– Verantwortung als Projektleiter/-in für Kunden- sowie Forschungsprojekten
– Selbständige und eigenverantwortliche Umsetzung anspruchsvoller Entwicklungs-und Projektsteuerungsaufgaben
– Entwicklung von Konzepten und Algorithmen
– Enge Zusammenarbeit mit angrenzenden Bereichen

Deine Chancen:

– Große Verantwortung für Projekte, herausfordernde Problemstellungen, selbstständiges Arbeiten, und viele Möglichkeiten eigene Ideen einzubringen
– Einblick in die „Airbus-Welt“ und Kontakt zu internationalen Kunden aus unterschiedlichen Industrien
– Ein junges, kreatives Umfeld mit einem schnell wachsenden, offenen Team und flachen Hierarchien
– 100% Startup Feeling (gratis Kaffee & Bier, Team Pizza & Events, home office, technische Spielzeuge wie AR Brillen, 3D Drucker, Roboter Baukästen)

Dein Profil:

– Master in Elektrotechnik, Mathematik, Informatik oder vergleichbare Ausbildung
– Berufserfahrung als Projektleiter/-in oder Promotion
– Programmierkenntnisse in Python
– Kenntnisse in Data Science, z.B. Data Mining, maschinelles Lernen etc.
– Gute Kommunikationsfähigkeit
– Gute Deutschkenntnisse in Wort und Schrift
– Begeisterung und Leidenschaft für technische Innovationen

Datum: ab sofort
Standort: Ludwig Bölkow Campus in Taufkirchen

Haben wir Dein Interesse geweckt? Dann freuen wir freuen uns auf Deine Bewerbung mit aussagekräftigem Anschreiben, Lebenslauf und Zeugnissen!ten/snoitulos-yrotcafni]ta[ofni